ENGINE TECHNICAL DATA [MZ-CD 1.6 (Y6)]


B3E015000000W01

Item

Specification

MZ-CD 1.6 (Y6)

LUBRICATION SYSTEM

Oil pressure (approx. quantity)
[oil temperature: 100 °C {212 °F}]
(kPa {kgf/cm2, psi}) [rpm]
230-370
{2.35-3.77, 33.4-53.6} [2,000]
Oil capacity
(approx. quantity)
Oil replacement
(L {US qt, Imp qt})
3.4 {3.6, 3.0}
Oil and oil filter replacement
(L {US qt, Imp qt})
3.8 {4.0, 3.3}
Total (dry engine)
(L {US qt, Imp qt})
4.2 {4.4, 3.7}

COOLING SYSTEM

Coolant capacity
(L {US qt, Imp qt})
With heater:
9.0 {9.5, 7.9}
Without heater:
8.5 {9.0, 7.5}
Cooling system cap valve opening pressure
(kPa {kgf/cm2, psi})
135-155 {1.38-1.58, 19.6-22.4}
Thermostat
Initial-opening temperature
(°C {°F})
88 {190}

CHARGING SYSTEM

Battery
Electrolyte gravity
1.22-1.29 [20 °C {68 °F}]
Maximum back-up current*1
(mA)
20
Test load chart
(A)
Battery type
(5-h rate)
80D26L (55)
195
Slow charge
(A)
Battery type
(5-h rate)
80D26L (55)
5.5-6.5
Quick charge
(A/30 min.)
Battery type
(5-h rate)
80D26L (55)
35
Generator
Standard voltage
(V)
Ignition switch ON
Terminal
B
13.0-15.0
1
13.0-15.0
2
-
3
1.5 or less (Engine off)
Idle [20 °C {68 °F}]
Terminal
B
13.0-15.0
1
13.0-15.0
2
-
3
Alternates between 0 and 5.0
Minimum current
[ambient temperature 20 °C {68 °F}, voltage 13.0-
15.0 V, both engine and generator are cold]
(A)
50*2

STARTING SYSTEM

Starter
No load test
Voltage
(V)
12
Current
(A)
80 or less

Recommended engine oil

Item

Specifications

Europe

Except Europe
Grade
API CF or ACEA B1/B3/B5
API CF or ACEA B3
API CD/CE/CF-4 or ACEA B3/B4
API CD/CE/CF-4
Viscosity (SAE)
5W-30
10W-40
-
5W-30, 10W-30
Remarks

Mazda genuine Dexelia oil e.g.

-
-

*1 :
Back-up current is the constant flow of current present (for the audio unit, clock, PCM, etc.) when the ignition switch is off and with the ignition key removed.
*2 :
Turn the following electrical loads on and verify that the current reading increases more than the minimum current.
• Headlights (high-beam)
• Blower motor (high)
• Rear window defroster
• Stop lamp